Steel Inventory

Large Quantities Available Daily with Other Sizes Available

Phone (563) 921-3445
Fax: (563) 921-2108


Check out our Metal Properties Comparison Chart!





HOT ROLLED FLAT IRON (20 FT)
1/8" x 1/2, 3/4, 1", 1-1/4, 1-1/2, 2", 2-1/2, 3", 4", 5", 6"  
3/16" x 1/2, 3/4, 1", 1-1/4, 1-1/2, 2", 2-1/2, 3", 4", 5", 6"  
1/4" x 3/4, 1", 1-1/4, 1-1/2, 1-3/4, 2", 2-1/2, 3", 4", 5", 6", 8"  
3/8" x 3/8, 3/4, 1", 1-1/4, 1-1/2, 2", 2-1/2, 3", 4", 5", 6", 8"
1/2" x 1/2, 3/4, 1", 1-1/4, 1-1/2, 2", 2-1/2, 3", 4", 5", 6", 8", 10", 12"
5/8" x 1-1/2, 2", 2-1/2, 3", 4"
3/4" x 1-1/4, 1-1/2, 2", 2-1/2, 3", 4", 5", 6", 8", 12"
1" x 1-1/2, 2", 2-1/2, 3", 4", 6"  
1-1/4" x 2-1/2, 3", 4"
1-1/2" x 1-1/2, 3", 4", 6" 
2" x  3"    
* Italics means limited stock



HOT ROLLED ANGLE IRON (20 FT) 
1/8" x 1/2 x 1/2, 3/4 x 3/4, 1" x 1", 1-1/4 x 1-1/4, 1-1/2 x 1-1/2, 2" x 2"
3/16" x 1" x 1", 1-1/4 x 1-1/4, 1-1/2 x 1-1/2, 1-3/4 x 1-3/4, 2" x 1-1/2, 2" x 2", 2-1/2 x 1-1/2, 2-1/2 x 2-1/2, 3" x 2", 3" x 3"
1/4" x 1" x 1", 1-1/4 x 1-1/4, 1-1/2 x 1-1/2, 2" x 1-1/4, 2" x 1-1/2, 2" x 2", 2-1/2 x 1-1/2, 2-1/2 x 2-1/2, 3" x 2", 3" x 3", 3-1/2 x 3-1/2, 4" x 3", 4" x 4", 5" x 3"
5/16" x 5" x 5"
3/8" x 2" x 2", 2-1/2 x 2-1/2, 3" x 2", 3" x 3", 4" x 3", 4" x 4", 5" x 3-1/2, 5" x 5", 6" x 6"
1/2" x 4" x 4", 6" x 6"




CHANNEL IRON (20 FT)
1/8 x 1/2 x 1"                                    
1/8 x 1/2 x 1-1/4                          
1/8 x 1/2 x 1-1/2
1/8 x 1/2 x 2"                                   
1/8 x 1" x 2"
3/16 x 1" x 2"
3"
4"
5"
6"
8"
Standard weight is stocked, but many available in lighter and heavier thicknesses and flange widths. Custom ordered in.


HOT ROLLED SQUARE (20 FT) 
3/8" x 3/8"
1/2" x 1/2"
3/4" x 3/4"
1" x 1"
1-1/4" x 1-1/4"
2" x 2" (Rounded corner for hitches)

 
HOT ROLLED ROUND (Rod) (20 FT)
1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 1"

 

COLD ROLLED ROUND SHAFT C1018 Material (12 FT)  
1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1" (20 FT), 1-1/16, 1-1/8, 1-1/4 (20 FT), 1-5/16, 1-3/8 (20 FT), 1-7/16, 1-1/2 (20 FT), 1-5/8, 1-11/16, 1-3/4 (20 FT), 1-7/8 (20 FT), 1-15/16 (20 FT), 2" (20 FT), 2-1/8, 2-3/8, 2-3/4, 5
          
 
COLD ROLLED SQUARE CR 1018 (12 FT)
1/8, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 1", 1-1/8, 1-1/4, 1-1/2 


COLD ROLLED ROUND SHAFT 1045 Turned, Ground & Polished (20/24 FT)
3/4"
1"
1-3/16"
1-1/4"
1-3/8"
1-7/16"
1-1/2"
1-3/4"
1-15/16"
2"
2-13/16"
2-1/4"
2-7/16"
2-1/2"
2-15/16"
3"
4"
4-15/16"
6"


PTO TUBING AND SHAFTING-AMERICAN SQUARE AND RECTANGLE, METRIC 2, 3, 6 LOBE --> See PTO page
       

COLD ROLLED HEXAGON SHAFTING CR1018 (
12 FT)
9/16, 5/8, 3/4, 7/8, 1", 1-1/8, 1-1/4


COLD ROLLED ANNEALED HEX 4140/4142 (12 FT)
5/8, 7/8, 1-1/8, 1-1/4, 1-1/2,1-3/4


BLACK ROUND PIPE (21 FT) 
Standard: Schedule 40* 
1/8, 1/4, 3/8, 1/2, 3/4, 1", 1-1/4, 1-1/2, 2", 2-1/2, 3", 3-1/2, 4", 5", 6", 8" 
Heavy: Schedule 80*
3/8, 1/2, 3/4, 1", 1-1/4, 1-1/2, 2", 2-1/2, 3", 3-1/2, 4", 5", 6"
*Measure I.D., pipe size instead of tested if available.




 

ELECTRIC WELD ROUND TUBING (20 FT): 
Measure O.D.
10GA: 10", 12", 12-3/4"
11GA: 3/4, 1", 1-1/4", 1-1/2, 1-3/4, 2", 2-1/2, 3", 4", 5-1/2", 6",  8", 10"    
12GA: 8", 10"     
14GA: 1-1/2, 1-3/4, 2", 2-1/8, 2-1/4, 2-3/8, 2-1/2, 2-3/4, 3", 3-1/2, 4", 5", 6", 7", 8"  
16GA: 1-3/4, 3", 3-1/4
3/16" Wall (7GA): 6" OD, 10" OD, 12" OD 
1/4 Wall: 5" OD Electric Weld Round Tube

 

ROUND D.O.M. OR BUSHING STOCK TUBING: 
Measure OD and ID
1/8" Wall:
5/8 OD x 3/8 ID DOM Bushing Stock
3/4 OD x 1/2 ID
7/8 OD x 5/8 ID
1" OD x 3/4 ID
1-1/8 OD x 7/8 ID
1-1/4 OD x 1" ID
1-3/8 OD x 1-1/8 ID
1-1/2 OD x 1-1/4 ID
1-5/8 OD x 1-3/8 ID
1-3/4 OD x 1-1/2 ID
1-7/8 OD x 1-5/8 ID
2" OD x 1-3/4 ID
2-1/8 OD x 1-7/8 ID
2-1/4 OD x 2" ID
2-1/2 OD x 2-15/64 ID
2-3/4 OD x 2-1/2 ID

3/16" Wall:
7/8 OD x 1/2 ID
1" OD x 5/8 ID
1-1/8 OD x 3/4 ID
1-1/4 OD x 7/8 ID
1-3/8 OD x 1" ID
1-1/2 OD x 1-1/8 ID
1-5/8 OD x 1-1/4 ID
1-3/4 OD x 1-3/8 ID
1-7/8 OD x 1-1/2 ID
2" OD x 1-5/8 ID
3-3/8 OD x 3" ID
3-1/2 OD x 3-1/8 ID

1/4" Wall
1" OD x 1/2 ID
1-1/8 OD x 5/8 ID
1-1/4 OD x 3/4 ID
1-3/8 OD x 7/8 ID
1-1/2 OD x 1" ID
1-5/8 OD x 1-1/8 ID
1-3/4 OD x 1-1/4 ID
1-7/8 OD x 1-3/8 ID
2" OD x 1-1/2 ID
2-1/8 OD x 1-5/8 ID
2-1/4 OD x 1-3/4 ID
2-3/8 OD x 1-7/8 ID
2-1/2 OD x 2" ID
2-3/4 OD x 2-1/4 ID
3" OD x 2-1/2 ID
3-1/2 OD x 2.97" ID
3-3/4 OD x 3-1/4 ID

3/8" Wall:
1-1/2 OD x 3/4 ID
1-3/4 OD x 1" ID
2" OD x 1-1/4 ID
2-1/4 OD x 1-1/2 ID
2-3/8 OD x 1-5/8 ID
2-1/2 OD x 1-3/4 ID
2-3/4 OD x 2" ID
4-1/2 OD x 3-3/4 ID

1/2" Wall:
2" OD x 1" ID
2-1/4 OD x 1-1/4 ID
2-1/2 OD x 1-1/2 ID
2-3/4 OD x 1-1/2 ID
2-3/4 OD x 1-3/4 ID
3" OD x 2" ID
3-1/2 OD x 2-1/2 ID
4" OD x 3" ID
5" OD x 4" ID
6" OD x 4-1/2 ID


STEEL SQUARE TUBING (24 FT)
1/2 x 16GA
3/4 x 14GA
1"14GA, 11GA
1-1/4 14GA, 11GA, 3/16
1-1/2 x 14GA, 11GA, 3/16, 1/4
1-3/4 x 11GA
2" x 14GA, 11GA, 3/16, 1/4
2-1/2 x 11GA, 3/16, 1/4
3" x 11GA, 3/16, 1/4, 3/8
3-1/2 x 3/16, 1/4
4" x 3/16, 1/4, 3/8, 1/2
4-1/2" x 3/16
5" x 1/4 (20 FT)
6" x 1/4 (20 FT)
8" x 3/8 


RECTANGULAR TUBING (24 FT) 
1-1/2 x 1" x 14 GA 
2" x 1" x 14 GA 
2-1/2 x 1-1/2 x 3/16
3" x 1-1/2 x 11GA, 3/16, 14GA
3" x 2" x 3/16, 1/4, 5/16 
4" x 2" x 11GA, 3/16, 1/4 
4" x 3" x 3/16, 1/4 (20 and 24 FT), 3/8
5" x 2" x 3/16
5" x 2-1/2 x 3/16 (20 FT)
5" x 3" x 3/16, 1/4, 3/8
6" x 2" x 3/16, 1/4
6" x 3" x 3/16, 1/4, 3/8
6" x 4" x 3/16, 1/4 (20 and 24 FT), 3/8 (20 and 24 FT)
8" x 3" x 3/8
8" x 4" x 3/16, 1/4, 3/8
10" x 2" x 3/16
*Many more sizes and lengths available to order*


HOT ROLLED SHEETS & PLATES
7GA (3/16) (4' x 10', 5' x 10', 6' x 10'), Grade 50 4' x 10'
10GA (4' x 10', 5' x 10', 6' x 10')
11GA (4' x 10', 5' x 10', 6' x 10')
12GA (4' x 10', 5' x 10', 6' x 10')
14GA (4' x 10', 5' x 10')
16GA (4' x 10')
1/4 (4' x 10', 5' x 10', 6' x 10'), Grade 50 6' x 10'
5/16 (4' x 10')
3/8 (4' x 10')
1/2 (4' x 10')
5/8 (4' x 10')
3/4 (4' x 10')
1" (4' x 10')
1-1/4" (4' x 10')
1-1/2" (4' x 10')
*Can shear up to 1/4" Steel 10' wide*
 

AR400 PLATE ABRASION RESISTANT
3/16, 1/4, 3/8, 1/2


GALVANIZED SHEETS (4' x 10')      
18GA, 14GA, 10 GA (can order other sizes)


STAINLESS STEEL SHEETS
10GA (4' x 10')
11GA (4' x 10')
12 GA (4' x 10')
14GA (4' x 10')
18GA (4' x 10')
3/16 (7GA) (4' x 10')
1/4 (4' x 10')


STAINLESS STEEL ANGLE (21 FT)
1 x 1 x 1/8 (20 FT)    
1-1/2 x 1-1/2 x 1/8 
1-1/2 x 1-1/2 x 3/16 
2 x 2 x 3/16 
2 x 2 x 1/4


STAINLESS STEEL FLAT (12 FT)
1/8 x 1-1/2
1/8 x 2
1/4 x 1-1/2
1/4 x 2
3/8 x 4
1/2 x 3


STAINLESS STEEL PIPE (20 FT)
1/8"
1/2"
3/4"
1"


STAINLESS STEEL ROUND (12 FT)
3/16" 
1/4"
5/16"
3/8"
1/2"
5/8"
3/4"
1"
1-1/2" 


STAINLESS STEEL SQUARE TUBE (20 FT)
1 x 1 x 14GA
1-1/2 x 1-1/2 x 11GA
1-1/2 x 1-1/2 x 14GA
4 x 2 x 11GA


INLAND 4 WAY FLOOR PLATES  
1/8 (4' x 10')
3/16 (4' x 10', 6' x 10') 
1/4 (4' x 10', 6' x 10')


GALVANIZED DECK SPAN
4-3/4 x 1-1/2 x 12GA
7" x 1-1/2 x 12GA
9-1/2 x 1-1/2 x 12GA
11-3/4 x 1-1/2 x 12GA


EXPANDED METAL      
1/2 x #13 Flattened (4' x 8')         
3/4 x #9 Regular (4' x 10')
3/4 x #9 Flattened (4' x 10')
1" x 2.88 ID Opening 4.0lb Grating (4' x 10')
1-1/2 x #9 Flattened (4' x 10')
 
 
BEVELED EDGE GRADER 
        
3/8 X 3 (20'6")    
1/2 X 4 (20.5 FT)         
1/2 X 6 (38 FT)        
5/8 X 6 (41FT)
3/4 X 6 (41FT)   
3/4 X 8 (41 FT)
1 X 8 (41 FT)                    


ALUMINUM  (MANY SIZES AVAILABLE BY REQUEST)

#6061 ALUMINUM FLAT (12FT)
1/8" x 1", 1-1/2" 
3/16" x 1", 1-1/4, 1-1/2, 2", 3" 
1/4" x 1", 1-1/4, 1-1/2, 2", 3", 4", 5" 
3/8" x 1-1/4, 1-1/2, 2", 2-1/2", 3", 4", 5" 
1/2" x 1-1/2, 2", 3", 4", 6"
3/4" x 2"
1" x 4"

 

#6061 ALUMINUM ANGLE (25 FT)
1/8": 1" x 1", 1-1/4 x 1-1/4, 1-1/2 x 1-1/2 
3/16": 
1-1/2 x 1-1/2, 2" x 2" 
1/4": 1" x 1", 1-1/2 x 1-1/2, 2" x 2", 3" x 3"
3/8": 2" x 2", 4" x 4"

 
#6061 ALUMINUM SQUARE (12 FT)
1/2" x 1/2"
3/4" x 3/4"
1" x 1"
1-1/4" x 1-1/4"
1-1/2" x 1-1/2"


#6063 ALUMINUM SQUARE TUBE (21 FT)
1/8" x 3/4, 1", 1-1/4, 1-1/2, 2", 2-1/2, 4"(20' or 21')
3/16" x 2", 3"


ALUMINUM RECTANGULAR TUBE (21 FT)
1/8 x 3" x 2"
1/8 x 4" x 2"
1/8 x 5" x 2"
1/4 x 4" x 2"

 
#6061 ALUMINUM CHANNEL (25 FT)    
.170 x 3"
.247 x 4"
.190 x 5"
.225 x 6"

 
#6063 T52 ALUMINUM CHANNEL (16 FT)
1/8 x 1" x 2"


#6061 ALUMINUM ROUND PIPE SCH. 40 (20 FT)   
1/2, 3/4, 1", 1-1/4, 1-1/2, 2"  


#6061 ALUMINUM ROUND (12 FT)      
3/8, 1/2, 5/8, 3/4, 1" 


#5052-H32 ALUMINUM SHEET      
.063 4' x 10' (40 FT2)
.100 4' x 8' (40 FT2)
.125 (11GA or 1/8") 4' x 10' (40 FT2)
.190 (7GA or 3/16") 4' x 10' (40 FT2)
.250 (4GA or 1/4") 4' x 12' (48 FT2)


#3003 ALUMINUM DECK/FLOOR/TREAD PLATE    
.125 (11GA or 1/8") 4' X 10' (40FT2)      
.188 (3/16") 4' x 8' (32FT2)
.25 (1/4") 4' x 8' (32FT2)

ALUMINUM DECK SPAN 
4-3/4 x 1-1/2 x 14GA (10FT)
7" x 2" x 12GA (12 FT)

Stainless
Rounds and flats plus sheets .. more coming.

We can order a large variety of types and sizes of steel, beyond what is shown here. Call us at (563) 921-3445 to order.