Below is listed the normal stock of the Bondioli & Pavesi Series 6
compatible. However, we have the capability to order others as well. Contact us at 563-921-3445.
S7 uses a 4 lobe tubing/yokes which is available, but not stocked as of yet. Shields that fit a BP6 usually don't fit a S7.
Complete PTO Drive Shaft Assemblies | Part Number | A Compressed Length | B Compressed Length | Tractor QD Pin Yoke Bore | | DN8-0109 | 1310mm (51.57") | 1432mm (56.38") | 1.375 x 6 Spl. |
WARNING: The inner profile tube must engage the outer profile tube 1/2 its overall length at the maximum extended position.
Cross and Bearing Kit: Outside Lock-Up | Part Number | Bearing Diameter | Overall Length | | DN3-0621 | 30.2mm (1-3/16") | 92.0mm (3-5/8") |
Tractor Yokes: Pin Type Quick Disconnect| Part Number | Bore | Length | QD Pin Kit | | DN8-6012 | 1-3/8"-6 SPL | 122.0mm (4-13/16") | DN56-0040 | | DN8-6021 | 1-3/8"-21 SPL | 122.0mm (4-13/16") | DN56-0040 |
| Part Number | Bore | Length | Use W/ Tube Part Number | | DN8-6030 | 45.0mm (1-25/32") | 105.0mm (4-1/8") | DN70-0505 |
Inner Profile Tube-59" Lengths | Part Number | O.D. | Wall Thickness | Use W/ Yoke Part Number | | DN70-0505 | 44.7mm (1-49/64") | 4.0mm (5/32") | DN8-6030 |
Outer Profile Yoke| Part Number | Bore | Length | Use W/ Tube Part Number | | DN8-6020 | 54.0mm (2-1/8") | 107.0mm (4-7/32") | DN70-0704 |
Outer Profile Tube--59" Lengths | Part Number | O.D. | Wall Thickness | Use W/ Yoke Part Number | | DN70-0704 | 53.6mm (2-7/64") | 3.775mm (5/32") | DN8-6020 |
| Part Number | Bore | Length | Keyway | Hole Size | | DN8-6010 | 31.75mm (1-1/4") | 105.0mm (4-9/64") | 1/4" | 3/8"-16 | | DN8-6011 | 34.93mm (1-3/8") | 105.0mm (4-9/64") | 5/16" | 3/8"-16 | | DN8-6016 | 34.93mm (1-3/8") | 110.0mm (4-11/32") | --- | 17/32" DT |
| Part Number | Overall Length | Bell O.D. | | DN69-2248 | 51" | 7-1/16" |
| Part Number | Bearing I.D. | Bearing Width | Use W/Shield Part Number | | DN56-6106 | 2-11/16"
2-11/32" | 5/32" | DN69-2248 |
Note: Two bearings per box
Tractor Yoke: Safety Slide Lock | Part Number | Dim. "A" Bore | | DW101-8606 | 1-3/8" X 6 Spl. | | DW101-8620 | 1-3/4" X 20 Spl. | | DW101-8621 | 1-3/8" X 21 Spl. |
Ball Shear| Part Number | Dim. "A" Bore | | DW104-8606 | 1-3/8"-6 Spl. |
Extended Lubrication Cross & Bearing Kit (E-kit)| Part Number | Dim. "A" | Dim. "B" | | DW201-8692 | 30.2mm (1-3/16") | 92.0mm (3-5/8") |
Clamp Yoke | Part Number | Dim. "A" Bore | | DW807-8606 | 1-3/8" X 6 Spl. | | DW807-8620 | 1-3/4" X 20 Spl. |
| Part Number | Overall Driveline Length | Bearing Kit (2 per kit) | | DW902-3560 | 60" | DW961-3567 |
Call us at (563) 921-3445 to order. | 
