Below is listed the normal stock of the 14/2000 series. However, we have the capability to order others as well. Contact us at 563-921-3445.
Cross and Bearing Kit: Inside Lock-Up
| Part Number |
Bearing Dia. |
Lock-Up Dim. |
Overall Length |
| DN1-2075 |
1-1/8"
|
2-5/8" |
2-5/8" |
Tractor Yokes: Quick Disconnect (Pin Type Q.D.)
| Part Number |
Bore |
Length |
Pin Repair Kit Part Number |
| DN20-9309 |
1-3/8"-6 SPL |
4-1/4" |
56-1857 |
| DN20-9325 |
1-3/8"-21 SPL |
4-1/4" |
56-1857 |
Tractor Yokes: Quick Disconnect (Collar Type Q.D.)
| Part Number |
Bore |
Length |
Collar Repair Kit Part Number |
| DN20-9330 |
1-3/8"-6 SPL |
4-3/4" |
56-3001 |
Round Implement Yokes (with Set Screw or Drill Thru)
| Part Number |
Bore |
Length |
Keyway Width/Loc. |
Hole Size |
Loc. |
Dist. to End |
| DN20-9115 |
1" |
3-3/4" |
1/4" EAR |
3/8"-16 |
GAP |
7/8" |
| DN20-9117 |
1-1/8" |
3-3/4" |
5/16" EAR |
3/8"-16 |
GAP |
7/8" |
| DN20-9302 |
1-1/4" |
3-3/4" |
1/4" EAR |
3/8"-16 |
GAP |
7/8" |
| DN20-9119 |
1-1/4" |
3-3/4" |
5/16" EAR |
3/8"-16 |
GAP |
7/8" |
| DN20-9120 |
1-3/8" |
3-3/4" |
5/16" EAR |
3/8"-16 |
GAP |
7/8" |
| DN20-9154 |
1-7/16" |
3-3/4" |
3/8" EAR |
3/8"-16 |
GAP |
7/8" |
| DN20-9307 |
1-1/2" |
3-3/4" |
3/8" GAP |
3/8"-16 |
EAR/GAP |
7/8" |
Round-Double Keyway Implement Yokes (with Set Screw)
| Part Number |
Bore |
Length |
Keyway Width/Loc. |
Hole Size |
Loc. |
Dist. to End |
| DN20-9216 |
1-1/8" |
3-3/4" |
1/4" & 5/16" EAR |
3/8"-16 |
GAP |
7/8" |
Hexagon Implement Yokes (with Set Screw)
| Part Number |
Bore |
Length |
Hole Size |
Loc. |
Dist. to End |
| DN20-9191 |
1-1/4" |
4" |
1/4"-28 |
GAP |
1-1/2" |
Shear Implement Yokes (with Drill Thru)
| Part Number |
Bore |
Length |
Hole Size |
Loc. |
Dist. to End |
| DN20-9160 |
1-3/8" |
3-1/2" |
17/32" |
GAP |
1/2" |
Spline Implement Yokes (with Set Screw or Drill Thru)
| Part Number |
Bore |
Length |
Hole Size |
Loc. |
Dist. to End |
| DN20-9132 |
1-3/8"-6 SPL |
3-3/4" |
21/64" |
GAP |
15/16" |
| DN20-9193 |
1-3/8"-21SPL |
3-3/4" |
21/64" |
GAP |
7/8" |
Square Implement Yokes (with Set Screw or Drill Thru)
| Part Number |
Bore |
Length |
Hole Size |
Loc. |
Dist. to End |
| DN20-9127* |
1-1/4" |
3-9/16" |
3/8"-16 |
GAP |
3/4" | *Double Square
Shaft Weld Yoke-(Watch Timing)
| Part Number |
Bore |
Length |
Use w/ Shaft Part Number |
| DN20-9126 |
1" X 1-1/8" |
3-3/16" |
73-1001 | *Note: 90 Degree difference between Neapco and Weasler
Round and Rectangular Tube Weld Yoke
| Part Number |
Bore |
Length |
Use w/ Tube Part Number |
For Tube |
| DN20-9131 |
1-1/2" RD |
4" |
70-2000 |
2" X .083(14GA) |
| DN20-9313 |
1-9/32" X 1-13/32" RECT |
3-3/16" |
70-1250 |
1-1/4" X 1-3/4" |
| Part Number |
I.D. |
Length |
Lube Fitting |
For Tube |
Shield Brg. No. |
| DN53-2034 |
1" x 1-1/8" |
5" |
YES |
2" x .083(14GA) |
56-2294
56-2295 |
| Part Number |
Overall Driveline Length |
Length |
Bell O.D. |
| DN69-1248 |
60" |
51" |
6-1/8" | Shield Bearings are not included. Shield can be cut shorter to fit 36" and 48" drives.
| Part Number |
Bearing I.D. |
Bearing Width |
Use W/ Shield Part Number |
| DN56-2000* |
2-1/16" |
11/32" |
DN69-1248 | *Two per box
Tractor Yoke (Safety Slide Lock)
| Part Number |
Dim. "A" Bore |
| DW101-1420 |
1-3/4" x 20 Spl. |
Tractor Yoke (Quick Disconnect)
| Part Number |
Dim. "B" Bore |
| DW102-1418 |
1-1/8" Hex |
Ball Shear Device (with Spring-Lok) | Part Number | Dim. "A" Bore | Shear Bolt | | DW104-1406 | 1-3/8" X 6 Spl. | 5/16"-18 Gr. 5 |
Extended Lubrication Cross & Bearing Kit (snap ring located in yoke) | Part Number | Dim. A | Dim. B | | DW201-1400 | 1-1/8" | 2-5/8" |
Shaft Weld Yoke with Bearing Groove (Guard must rotate freely on yoke) | Part Number | Dim. A | | DW300-1400 | 1 x 1-1/8" |
Hexagon Bore (with Set Screw)
| Part Number |
Dim. "A" Bore |
| DW805-1418 |
1-1/8" |
14 Series Shield | Part Number | Overall Driveline Length | | DW900-2560 | 60" |
14 Series Shield Bearing **DW920-1200 and DW920-0102 are old style bearings
Pin Snap Hitch Repair Kits | Part Number | Fits Spline Size | Wt. | | DG02010306 | 1-3/8" X 6 | .13 lbs. | | DG02010321 | 1-3/8" X 21 | .19 |
Nylon Bearing, Thrust Washer and Snap Ring
WELDAJOINT Yokes | Part Number | Counter-bore Dia. | A | B | Wt. | | DG179-1400 | 1-1/2 | 2-1/4 | 2-9/16 | 1.44 lbs |
Safety Orange Plastic PTO Guards: Complete Guard Set with Notches | Part Number | PTO Dim. L | Wt. Lbs. | | DG300-1248 | 48 | 2.20 |
Call us at (563) 921-3445 to order. | 
