For Universal Quick Attach on late model skid loaders (often referred to as Bobcat style, also includes hole for Case 1840)10 degree Tilt Ahead-Case, Mustang, Gehl Skidloaders, and more
NV102-C2: 2 Tine Model Conus 2 - replaced with new model
Moves bales, pallets, gates, etc.
47 1/2" wide with 10 degree tilt ahead
Tines 28" on center
Usually sold with 49" Conus 2 Tines (5' wide round bales, 4' wide square bales, sticks through 3x3 squares)
Available with 39" Conus 2 Tines (3x3 or 3x4 square bales or 4' round bales)
NV103-C2: 3 Tine Model Conus 2 -replaced with new model
Tines are 21-3/4" on center, 10 degree tilt ahead
48" wide, 47-1/2" tall for double stacked large square bales
Usually sold with 39" Conus 2 Tines (3x3 or 3x4 square bales or 4' round bales)
Available with 49" Conus 2 Tines (5' wide round bales, 4' wide square bales, sticks through 3x3 squares)
Some prefer a 49" in the center, and two 39" on the outsides
NV00H: Quick Attach Hitch Bracket
Easily move equipment around with your skid loader
Also has bracket for hitch ball- used to move trailers
Has 2 chain grab hooks to attach chain up to and a pipe to hold a hitch pin
48" wide, 21" tall
Quick Attach Brackets with Retractable Side Tubes
For Universal Quick Attach on late model skid loaders (often referred to as Bobcat style) 0 degree Tilt Ahead - Newer John Deere, Bobcat, New Holland, and more
NV002-C2: 2 Tine Model Conus 2- replaced with new model
Moves bales, pallets, gates, etc.
46" tall with side tubes extended up for double stacked bales
53-1/2" wide with no tilt ahead
Tines are 28" on center
Usually sold with 49" Conus 2 Tines (5' wide round bales, 4' wide square bales, sticks through 3x3 squares)
Available with 39" Conus 2 Tines (3x3 or 3x4 square bales or 4' round bales)
Side tubes can be removed or just retracted
NV003-C2: 3 Tine Model Conus 2- replaced with new model
46" tall with side tubes extended up for double stacked bales
Tines are 21 3/4" on center with no tilt ahead
Usually sold with 39" Conus 2 Tines (3x3 or 3x4 square bales or 4' round bales)
Available with 49" Conus 2 Tines (5' wide round bales, 4' wide square bales, sticks through 3x3 squares)
Some prefer a 49" in the center and two 39" on the outsides
Side tubes can be removed or just retracted
NV004-C1: 4 Tine Model Conus 1- replaced with new model
63 1/2" wide, 43" tall- for double stacked bales
Tines are 18" on center with no tilt ahead
Usually sold with 31.9" Conus 1 Tines
Available with 39.4" Conus 1 Tines
For use with square bales only (2x2, 3x3, 3x4, or 4x4 square bales)
Side tubes can be removed, or just retracted
NVMUST-C2: Mustang/OMC/ Owatonna-Large Single Pin 2 Tine Model Conus 2
Moves bales, pallets, gates, etc.
48" wide, 24" tall
Tines are 28" on center
Available with 49" Conus 2 Tines
Also available with 39" Conus 2 Tines
Global/Euro Normal Quick Attach Frames
NVGLOBAL-2-C2: Global 2 Tine Conus 2
Moves bales, pallets, gates, etc.
Global/Euro Normal Quick Attach
53 1/2" wide, 33 1/2" tall
Tines are 28 1/2" on center, no tilt ahead
Available with 39" Conus 2 Tines (3x3 or 3x4 square bales or 4' round bales)
Usually sold with 49" Conus 2 Tines (5' wide round bales, 4' wide square bales, sticks through 3x3 squares)
Side tubes can be removed or just retracted
NVGLOBAL-2-C2: Global 3 Tine Conus 2
54" wide, 28.75" tall
Tines are 22" on center, no tilt ahead
Available with 49" Conus 2 Tines (3x3 or 3x4 square bales or 4' round bales)
Usually sold with 39" Conus 2 Tines (5' wide round bales, 4' wide square bales, sticks through 3x3 squares)
Side tubes can be removed or just retracted
Quick Attach Stabber Frame to Fit John Deere 600-700 Loader
JD6-700-2-C2: John Deere 600-700 2 Tine Conus 2
Moves bales, pallets, gates, etc.
Simpler and better, uses two 5/8 x 4 hitch pins to hold into quick attach, rather than JD style spring loaded latches which tend to fall in before hooking up
62" wide, 35" tall
Tines are 28" on center, no tilt ahead
Available with 39" Conus 2 Tines (3x3 or 3x4 square bales or 4' round bales)
Usually sold with 49" Conus 2 Tines (5' wide round bales, 4' wide square bales, sticks through 3x3 squares)
Side tubes can be removed or just retracted
JD6-700-3-C2: John Deere 600-700 3 Tine Conus 2
Simpler and better, uses two 5/8 x 4 hitch pins to hold into quick attach, rather than JD style spring loaded latches which tend to fall in before hooking up
62" wide, 34 1/2" tall
Tines are 26 1/4" on center, no tilt ahead
Available with 49" Conus 2 Tines (3x3 or 3x4 square bales or 4' round bales)
Usually sold with 39" Conus 2 Tines (5' wide round bales, 4' wide square bales, sticks through 3x3 squares)
Side tubes can be removed or just retracted
Contact us at (563) 921-3445 with questions and to order.