PTO‎ > ‎USA‎ > ‎

55/N55

Below is listed the normal stock of the 55/N55 series. However, we have the capability to order others as well. Contact us at 563-921-3445.



Cross and Bearing Kit: Outside Lock-Up
Part Number Bearing Dia. Lock-Up Dim.Overall Length 
DN3-0045 1-17/32" 4-5/16" 4-5/16" 


Slip Sleeve
Part Number I.D. Length Lube Fitting For Tube Shield Brg. No. 
DN53-26431-5/16"5" YES2-1/2" X .134(10GA)----
DN53-2644 1-5/16" 5" YES 2-3/4" x .109(12GA) DN53-2646 
*Not normally stocked


World Shield 
TM Plastic
Part Number Overall Driveline LengthLengthBell O.D. 
DN69-264860" 51" 6-1/8" 
Shield Bearings are not included.  Shield can be cut shorter to fit 36" and 48" drives.


Shield Bearing
Part Number Bearing I.D. Bearing Width Use W/ Shield Part Number 
DN56-0844 2-5/8" 13/32" DN69-2648 





Tractor Yoke: Safety Slide Lock
Part Number Dim. "A" Bore Repair Kit 
DW101-5506 1-3/8" X 6 Spl. DW13001400 Steel 
DW101-5520 1-3/4" X 20 Spl. DW13004020 Steel
DW101-5521 1-3/8" X 21 Spl. DW13001400 Steel 


Tractor Yoke: Ball Shear Device with Safety Slide Lock
Part Number Dim. "A" Bore Shear Bolt Repair Kit 
DW104-5506 1-3/8" X 6 Spl. (2) 3/8" X 16 Gr. 5 DW13001400 Steel  
DW104-5520 1-3/4" X 20 Spl. (2) 3/8" X 16 Gr. 5 DW13004020 Steel
DW104-55211-3/8" X 21 Spl. (2) 3/8" X 16 Gr. 5 DW13001400 Steel  


Shaft Weld Yoke with Bearing Groove (Shield must rotate freely on yoke)
Part Number Dim. "A" Bore Dim. "B" Bore 
DW300-5500 1-5/16" Sq. --- 
DW301-5500* 1-3/16" Sq. --- 
DW302-5500 --- 1-11/16" X 20 Spl. 
*Use DW04-15155 Nylon Bearing (see below)


Tube Weld Yoke with Bearing Groove (Guard must rotate freely on yoke)
Part NumberFits Tube Size
DW704-5500 2-1/2" (.120 wall) 


Round Bore Implement Yoke
with Keyway & Set Screw
Part Number Dim. "A" Bore Standard Keyway 
DW800-5524 1-1/2"3/8"
DW800-5526 1-5/8"3/8"
DW800-5528 1-3/4" 3/8" 
DW800-5532 2" 1/2" 


Clamp Yoke
Part Number Dim. "A" Bore 
DW807-5506 1-3/8" X 6 Spl. 
DW807-5520 1-3/4" X 20 Spl. 
DW807-5521 1-3/9" X 21 Spl. 


55 Series Shield
Part Number Overall Driveline Length
DW902-3560 60" 


55 Series Shield Bearing
Part Number 
DW921-4400* 
*4 per box
**DW920-4400 are old style bearings  


Shield Bearing
Part Number For use with 
DW04-15155 2-1/8" ID, DW902-3560 (ARTSWAY Blower) 



  
Pin Snap Hitch Repair Kits
Part Number Fits Spline Size Wt.
DG020155061-3/8" X 6.20 lbs
DG020155211-3/8" x 21.21 lbs


Nylon Bearing, Thrust Washer and Snap Ring
Part Number
DG128-5500 


Safety Orange Plastic PTO Guards: Complete Guard Set with Notches
Part Number PTO Dim. L Wt. Lbs. 
DG300-4448483.40



Call us at (563) 921-3445 to order.