Below is listed the normal stock of the 35/2200 series. However, we have the capability to order others as well. Contact us at 563-921-3445.
Cross and Bearing Kit: Outside Lock-Up | Part Number | Bearing Dia. | Lock-Up Dim. | Overall Length | | DN2-2275 | 1-1/4" | 3-7/32" | 3-7/32" |
Tractor Yokes: Quick Disconnect (Pin Type Q.D.)| Part Number | Bore | Length | Pin Repair Kit Part Number | | DN22-2312 | 1-3/8"-6 SPL | 4-3/16" | 56-1857 | | DN22-2317 | 1-3/8"-6 SPL | 4-13/16" | 56-1857 |
Tractor Yokes: Quick Disconnect (Collar Type Q.D.)
| Part Number | Bore | Length | Collar Repair Kit Part Number | | DN22-2330 | 1-3/8"-6 SPL | 5" | 56-3001 |
Round Implement Yokes (with Set Screw or Drill Thru) | Part Number | Bore | Length | Keyway/Width Loc | Hole Size | Loc. | Dist. to End | | DN22-1132 | 1-1/8" | 4-3/16" | 1/4" EAR | 3/8"-16 | GAP | 7/8" | | DN22-1133 | 1-1/4" | 4-3/16" | 1/4" EAR | 3/8"-16 | GAP | 7/8" | | DN22-1116 | 1-1/4" | 4-3/16" | 5/16" EAR | 3/8"-16 | GAP | 7/8" | | DN22-1118 | 1-3/8" | 4-3/16" | 5/16" EAR | 3/8"-16 | GAP | 7/8" | | DN22-1119 | 1-7/17" | 4-3/16" | 5/16" EAR | 3/8"-16 | GAP | 7/8" | | DN22-1154* | 1-1/2" | 4-3/16" | 3/8" EAR | 3/8"-16 | EAR/GAP | 7/8" | | DN22-1338 | 1-5/8" | 4-3/8" | 3/8" EAR | 3/8"-16 | EAR | 5/8" | | DN22-1316 | 1-3/4" | 4-3/8" | 3/8" EAR | 3/8"-16
17/64" DT | EAR
GAP | 7/8"
1-3/8" |
*Stocking DW8003524H as heavier version of this yoke--see Weasler section below
Spline Implement Yokes (with Set Screw or Drill Thru) | Part Number | Bore | Length | Hole Size | Loc. | Dist. to End | | DN22-1134 | 1-3/8"-6 SPL | 4-3/16" | 21/64" DT | GAP | 1-1/4" | | DN22-1330 | 1-3/8"-21 SPL | 4-3/16" | 21/64" DT | GAP | 1-1/4" |
Clamp Implement Yokes (with Drill Thru) | Part Number | Bore | Length | Hole Size | Bolt Fit | | DN22-1140 | 1-3/8"-6 SPL | 4-3/4" | 21/64" | 5/16" | | DN22-1105 | 1-3/8"-21 SPL | 4-3/4" | 17/32" | 1/2" |
Torque Limiter Implement Yokes | Part Number | Bore | Length | Flange Type | Dia. | Hole size | No. of Holes | | DN48-1181 | 1-1/16" | 4-5/16" | RECT | 8" | 11/32" DT | 4 |
| Part Number | Bore | Length | Use W/ Shaft Part Number | | DN22-1344 | 1-3/16" SQ | 3-5/8" | 73-1188 |
Tube Weld Yoke | Part Number | Bore | Length | Use W/ Tube Part Number | For Tube | | DN22-1343 | 1-5/8" RD | 4-1/2" | 70-2250 | 2-1/4" x .120(11GA) | | DN22-1325 | 1-5/8" RD | 4-1/2" | 70-2125 | 2-1/8" x .120(11GA) |
| Part Number | Bore | Length | Lube Fitting | For Tube | | DN53-2434 | 1-3/16" SQ | 5" | YES | 2-1/4" X .120(11GA) |
Bearing Stub| Part Number | Diameter | Bearing Diameter | Length, End to Weld | Use W/ Tube Part Number | | DN53-2247* | 1-3/8"-6 SPL | 1-3/8" | 4-1/2" | 70-2250 |
*Drilled for cone pointed set screw
| Part Number | Overall Driveline Length | Length | Bell O.D. | | DN69-2248 | 60" | 51" | 7-1/16" |
Shield Bearings are not included. Shield can be cut shorter to fit 36" and 48" drives.
Shield Bearing | Part Number | Bearing I.D. | Bearing Width | Use w/ Shield Part Number | | DN56-2200 | 2-1/16" | 11/32" | 69-2248 |
Tractor Yoke-Safety Slide Lock| Part Number | Dim. "A" Bore | | DW101-3520 | 1-3/4" X 20 Spl. |
Tractor Yoke-Quick Disconnect| Part Number | Dim. "B" Bore | | DW102-3505 | 1-1/4" Hex | | DW102-3518 | 1-1/8" Hex |
Tractor Yoke-Ball Shear Device with Safety Slide Lock | Part Number | Dim. "A" Bore | Dim. "B" Bore | | DW104-3506 | 1-3/8" X 6 Spl. | (2) 3/8"-16 Gr. 5 | | DW104-3521 | 1-3/8" X 21 Spl. | (2) 3/8"-16 Gr. 5 |
Cross and Bearing Kit, snap ring located in yoke | Part Number | Dim. "A" | Dim. "B" | | DW200-3501* | 1-1/4" | 3-7/32" |
*Interchanges with Howse, snap rings inside
Extended Lubrication Cross and Bearing Kit, snap ring located in yoke | Part Number | Dim. "A" | Dim. "B" | | DW201-3500 | 1-1/4" | 3-7/32" |
Shaft Weld Yoke, with bearing groove (Guard must rotate freely on yoke) | Part Number | "B" bore | | DW302-3500* | 1-11/16" X 20 Spl. |
*For use with DW921-4400 Nylon Bearing Kit
H-Yoke | Part Number | Dim. | | DW25643-1000 | 4-1/4" center to center |
Spline Sleeve with Grease Reservoir | Part Number | Length | Dim. "A" Bore | Fits Tube Size | | DW502-3500 | 8" | 1-5/16" X 20 Spl. | 2-1/8" (.120 Wall) |
Slip Sleeve with Grease Groove | Part Number | Length | Dim. "B" Bore | Fits Tube Size | | DW505-3500 | 5" | 1-11/16" x 20 Spl. | 2-1/2" (.120 Wall) |
Shaft Weld Yoke with Bearing Groove (Guard must rotate freely on yoke)| Part Number | "B" Bore | | DW301-3500 | 1-5/16" X 20 Spl. |
Spline Shaft--Induction Hardened | Part Number | Dim. "A" Size | Length | Major Dim. | | DW404-2120 | 1-5/16" X 20 Spl. | 3' | 1.380/1.375 | | DW404-2720 | 1-11/16" X 20 Spl. | 3' | 1.790/1.785 |
Round Bore Implement Yoke with Keyway & Set Screw | Part Number | Dim. "A" Bore | Standard Keyway | | DW8003524H | 1-1/2" | 3/8" with Pinhole |
Clamp Yoke | Part Number | Dim. "A" Bore | | DW807-3520 | 1-3/4" X 20 Spl. |
35 Series Shield | Part Number | Overall Driveline Length | | DW900-2560 | 60" |
35 Series Shield Bearing **DW920-3500 are old style bearings
Pin Snap Hitch Repair Kits | Part Number | Fits Spline Size | Wt. | | DG02010306 | 1-3/8" X 6 | .13 lbs. | | DG02010321 | 1-3/8" X 21 | .19 |
WELDAJOINT Yokes | Part Number | Counter-bore Dia. | A | B | Wt. | | DG179-3500 | 2 | 2-5/16 | 3-29/64 | 2.38 lbs |
Safety Orange Plastic PTO Guards: Complete Guard Set with Notches | Part Number | PTO Dim. L | Wt. Lbs. | | DG300-3548 | 48 | 2.55 |
Call us at (563) 921-3445 to order. | 
