PTO‎ > ‎Metric‎ > ‎

BP5

Below is listed the normal stock of the Bondioli & Pavesi Series 5 compatible. However, we have the capability to order others as well. Contact us at 563-921-3445.



  
Complete PTO Drive Shaft Assemblies
Part Number A Compressed Length B Compressed Length Tractor QD Pin Yoke Bore 
DN8-01071310mm (51.57")1422mm (55.98")1.375 x 6 Spl. 
WARNING: The inner profile tube must engage the outer profile tube 1/2 its overall length at the maximum extended position.


Cross and Bearing Kit: Outside Lock-Up
Part Number Bearing Diameter Overall Length 
DN2-052130.2mm (1-3/16")80.0mm (3-5/32")


Tractor Yokes: Pin Type Quick Disconnect
Part Number Bore Length QD Pin Kit 
DN8-50121-3/8"-6 SPL112.0mm (4-13/32")DN56-0040
DN8-50211-3/8"-21 SPL112.0mm (4-13/32")DN56-0400


Inner Profile Yoke
Part Number Bore Length Use W/ Tube Part Number 
DN8-503045.0mm (1-25/32")96.0mm (3-25/32")DN70-0505


Round Bore Keyway
Part Number BoreLengthKeyway Width Set Screw Thread Set Screw Dist. to End Ref. U-Joint
DN8-05011.50"96mm/3.78".375" .375-16 20mm/.79" 2-0521



Inner Profile Tube-59" Lengths
Part Number O.D. Wall Thickness Use W/ Yoke Part Number 
DN70-050544.7mm (1-49/64")4.0mm (5/32")DN8-5030


Outer Profile Yoke
Part Number Bore Length Use W/ Tube Part Number 
DN8-502051.6mm (2-1/32")98.5mm (3-7/8")DN70-0504


Outer Profile Tube--59" Lengths
Part Number O.D. Wall Thickness Use W/ Yoke Part Number 
DN70-050451.3mm (2-1/64")3.0mm (7/64")DN8-5020


Implement Yokes
Part Number Bore Length KeywayHole Size 
DN8-501031.75mm (1-1/4")96.0mm (3-25/32")1/4"3/8"-16
DN8-501134.93mm (1-3/8")96.0mm (3-25/32")5/16"3/8"-16
DN8-501634.93mm (1-3/8")96.0mm (3-25/32")---17/32 DT


World Shield Plastic
Part Number Overall Length Bell O.D. 
DN69-224851"7-1/16"


Shield Bearing
Part Number Bearing I.D. Bearing Width Use W/Shield Part Number
DN56-61052-15/32"
2-3/32"
5/32"DW69-2248
Note: Two bearings per box





5 Series Shield
Part Number Overall Driveline Length Bearing Kit (2 per kit)
DW902-3560 60" DW961-3505



Clamp Yoke
Part NumberSize For
DBP5-1-3/8x21CLAMP1-3/8 x 21 JD 1581 Batwing



Call us at (563) 921-3445 to order.