BP3

PTO‎ > ‎Metric‎ > ‎

**Same crosskit as WS I**

Below is listed the normal stock of the Bondioli & Pavesi Series 3 compatible. However, we have the capability to order others as well. Contact us at 563-921-3445.

Complete PTO Drive Shaft Assemblies

Part Number	A Compressed Length	B Compressed Length	Tractor QD Pin Yoke Bore
DN8-0103	1360mm (53.54")	1462mm (57.76")	1.375 x 6 Spl.

WARNING: The inner profile tube must engage the outer profile tube 1/2 its overall length at the maximum extended position.

Cross and Bearing Kit: Outside Lock-Up

Part Number	Bearing Diameter	Overall Length
DN1-0321	27.0mm (1-1/16")	70.0mm (2-3/4")

Tractor Yokes: Pin Type Quick Disconnect

Part Number	Bore	Length	QD Pin Kit
DN8-3012	1-3/8"-6 SPL	102.0mm (4-1/64")	DN56-0040
DN8-3021	1-3/8"-21 SPL	102.0mm (4-1/64")	DN56-0040

Inner Profile Yoke

Part Number	Bore	Length	Use W/ Tube Part Number
DN8-3030	36.0mm (1-27/64")	85.0mm (3-3/8")	DN70-0305

Inner Profile Tube-59" Lengths

Part Number	O.D.	Wall Thickness	Use W/ Yoke Part Number
DN70-0305	36.1mm (1-27/64")	3.1mm (1/8")	DN8-3030

Outer Profile Yoke

Part Number	Bore	Length	Use W/ Tube Part Number
DN8-3020	43.5mm (1-11/16")	80.0mm (3-5/32")	DN70-0304

Outer Profile Tube--59" Lengths

Part Number	O.D.	Wall Thickness	Use W/ Yoke Part Number
DN70-0304	43.4mm (1-45/64")	3.325 (1/8")	DN8-3020

Implement Yokes

Part Number	Bore	Length	Keyway	Hole Size
DN8-3011	25.4mm (1")	85.0mm (3-11/32")	1/4"	3/8"-16
DN8-3010	31.75mm (1-1/4")	85.0mm (3-11/32")	1/4"	3/8"-16
DN8-3016	34.93mm (1-3/8")	85.0mm (3-11/32")	---	17/32" DT

World Shield Plastic

Part Number	Overall Length	Bell O.D.
DN69-1248	51"	6-1/8"

Shield Bearing

Part Number	Bearing I.D.	Bearing Width	Use W/Shield Part Number
DN56-4103	2-3/32" 1-13/16"	5/32"	DW69-1248

Note: Two bearings per box

3 Series Shield

Part Number	Overall Driveline Length	Bearing Kit (2 per kit)
DW900-2560	60"	DW961-2534

Call us at (563) 921-3445 to order.

Comments

	Search this site

Contact Us

BP3